This can be used to power the circuitry that controls the Power On signal. Seasonics PS Vertex ATX 3.0 power supply family will include four SKUs: 80 Plus Gold-rated 1000W and 1200W models, as well as 80 Plus Platinum-badged 1000W and 1200W models, as discovered by. +5 VSB or “+5 V standby” supplies power even when the rest of the supply lines are off.This connection allows for remote sensing of the voltage drop in the power supply wiring. +3.3 V sense should be connected to the +3.3 V on the motherboard or its power connector.It remains low for a brief time (100–500 ms) after the PS_ON# signal is pulled low. Unfortunatelly its not true that you cannot connect PCIe 8-pin plug to EPS-12V (EATX) motherboard slot. PWR_OK or “Power Good” is an output from the power supply that indicates that its output has stabilized and is ready for use.To check your stand alone ATX power supply, simply connect the PS_ON# wire (green wire) to the grounding wire (black). It is internally pulled up to +5 V inside the power supply. My PSU doesnt have an 8-pin to 8-pin connector, but has instead an 8-pin to 4+4-pin. My PSU (which is modular) has the same exact 8-pin connector, under which it is written CPU. When the line is connected to GND (by the motherboard), the power supply will turned on. 1 My motherboard requires an 8-pin CPU power cable to be connected, other than the 24-pin main connector.
PS_ON# or “Power On” is a signal from the motherboard to the power supply.There are 4 wires which have special functions: In modern desktop computer system, there are two connectors for the motherboard: a 4-pin auxiliary connector providing additional power to the CPU, and a main 24-pin power supply connector, an extension of the original 20-pin version. An ATX power supply has several peripheral power connectors. Originally the motherboard was powered by one 20-pin connector.
0 kommentar(er)
